Why oil analysis?

The P-F curve is one that is used throughout reliability to demonstrate the point at which a component is expected to have a functional failure. There are many variations of the PF curve, and different monitoring technologies can be placed in specific orders accordingly. However, it remains dominant that oil analysis is among the top three techniques used for early detection of failure.

Oil analysis can be used to detect the presence of contaminants, metals and other molecules at a microscopic level and quantify these appropriately. Most OEMs (Original Equipment Manufacturers) publish their acceptable standards for various tests (usually standardized tests by some accredited body such as ASTM) and have these available to laboratories around the world. When an oil analysis test is performed (as per the stipulated standards), the lab will compare the actual values to the expected values (from the OEM) and then provide some guidance to the user on possible steps forward.

Every lab will have a specific format for reporting the results of your oil analysis (similar to the labs for reporting on blood samples). Typically, the actual value is shown and then there may be an expected range for the various characteristics or just an indication of whether the actual value falls outside of the range (on the higher or lower end of the scale).

Bureau Veritas, 2017, gives an example of a report and all of the variables involved here:

BV_Understanding-An-Oil-Analysis-Report_FINAL_11_8_2017

 

While this is their reporting standard, other labs will have a different format, but the tests will all conform to the same internationally recognized standard. As such, if oil is tested in the United States (as per a particular standard) and then tested in Italy (as per the same standard) then there can be some comparisons of these results. However, one must also be aware of the types of instruments being used and their calibration as this can account for slight differences in test results.  As such, oil analysis provides a global standard for which equipment performance can be compared across regions.

Find the full article here on Engineering Maintenance Solutions Magazine.