Gear Oil Storage and Handling

Similar to most oils, gear oils should be stored in a clean and dry space. Often (especially in the past), these gear oils see a settling of the additives to the bottom of the container, indicating a slightly shorter oil life span than other lubricants. However, this is no longer a highly occurring incident with the advancements in additive technology and improved blending practices.

As usual, it is always best to adhere to the OEM’s expiry dates for these products, as different OEMs recommend varying storage times for their products. Generally, synthetic lubricants have an estimated shelf life of 5-10 years, while mineral oils usually last for around 2-3 years, but this is heavily dependent on the OEM and storage conditions.

In some cases, customers tend to store these drums outside in the elements as it makes it easier for them to be readily accessible for decanting into the equipment. However, in these environments, the drums can collect water, which will enter the oil and then, by extension, enter the gearbox. This can cause issues for the equipment and lead to accelerated oil degradation.

Ideally, these oils should be stored in a cool, dry place with ready access to decanting equipment where the decanted oil will not be easily contaminated. Many industrial gearboxes typically require larger quantities of oil, and decanting can take place directly from the drum into the equipment or via a pump.

In these cases, the level of contamination must be minimized by ensuring that the fittings, hoses, etc., are clean and have not been used to decant other types of oils.